Error Messages; Maintenance; Cleaning; Technical Data - Velp Scientifica REC Manual De Instrucciones

Press on-off button in order to pass to the parameter you want to modify. The display will show the value saved for 3
seconds, and then the new value according to the position of the knob.
The new value is automatically saved after 4 seconds, if during this time the knob is not moved. "End" is shown and then the
system goes back to the main menu.
Once the new values are set, switch off and restart the instrument.
(*) When A is selected: in case of black-out, once the power is back the device will remain off
When b is selected: in case of black-out, once the power is back the device will automatically restart with the latest
settings

3.3 Error messages

If an error message appears on the display, please contact VELP Scientifica's technical service department.
When the display shows an error message, heating stops automatically.
NOTE: To remove the error message disconnect the instrument from the power supply.
AL1 Thermocouple is out of range
AL2 Excessive heating time

4. Maintenance

No routine or extraordinary maintenance is necessary apart from periodically cleaning the unit as described in this manual.
In compliance with the product guarantee law, repairs to our units must be carried out in our factory, unless previously
agreed otherwise with local distributors.The instrument must be transported in its original packaging and any indications
present on the original packaging must be followed (e.g. palletized).It is the responsibility of the user, to properly
decontaminate the unit in case of hazardous substances remaining on the surface or interior of the device. If in doubt about
the compatibility of a cleaning or decontamination product, contact the manufacturer or distributor.

4.1 Cleaning

Disconnect the unit from the power supply and use a cloth dampened with an non-inflammable non-aggressive detergent.

5. Technical data

Power supply
Dimensions WxHxD
Weight
Overall power
Dimension of the heating plate
Programmable temperature range
Type of temperature control
Overtemperature protection
Noise level
Temperature range
Storage temperature range
Max humidity
Level of electrical protection CEI EN60529
Overvoltage category
Pollution degree CEI EN61010-1
Max altitude

6. Accessories / Spare parts

A00001071 Hemispheric bowl for 250ml flasks
A00001072 Hemispheric bowl for 500ml flasks
A00001073 Hemispheric bowl for 1000ml flasks
A00001069 Support rod
10002097 Knob
10000239 Foot
230 V / 50-60 Hz or 115 V / 50-60 Hz
203x93.5x344 mm (8x3.68x13.5 in)
3.5 Kg (7.7 lbs)
780 W
180 x 180 mm
5 – 550 °C
Digital
Yes
<< 80 dBa
+5...+40 °C
-10...+60 °C
80%
IP 42
II
2
4000 m
A00001071
6
A00001072 A00001073
A00001069