Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en
Defective lamps must be immediately replaced with new ones. Please disconnect the exhaust hood
from the electrical network before changing the lamps! Please wait for the lamps to cool down before
replacing them! Then remove the glass cover with a small screwdriver. The lamp (Art. Nr.: 1717
Reflektorstrahler 28W Energy Reducer) can now be removed. Be certain to avoid contact with the skin
when inserting a new lamp. After replacing the lamp, replace the glass cover and press it gently until
it audibly clicks into place.
Malfunctions
Please consult our customer service immediately if the following malfunctions occur:
- The exhaust hood is making unidentifiable noises and you cannot determine a malfunction after inspecting
the quality of ventilation;
- The motor is not running properly (e.g. it is making strange noises) or is defective;
- The switch is not functioning properly.
Please be certain to provide the type designation of your model as well as the accompanying serial
number. This information can be found on the label located near the filter inside the hood.
Disposal
Packaging
The packaging of the exhaust hood is recyclable. Cardboard and polyethylene foil (PE) are used as
packaging materials. These materials are environmentally compliant and should be disposed of as per
the valid regulations of the respective location.
Exhaust Hood
Your local authorities will be happy to advise you regarding the environmentally friendly disposal of old
household appliances.
Environmental Instructions
All GUTMANN models are labeled as per European Directive 2002/96/EG on Waste Electrical and
Electronic Equipment (WEEE). This guideline provides the basic conditions valid for the EU-wide return
and recycling of old appliances. Please consult your dealer for the current disposal methods.
Technical Information
Connection to the electrical network:
230 V / 50 Hz, max. 270 Watt
Type of Illuminant: Halogen
Type G/4 21520 (12 V, 28 Watt)
Tabla de contenido
