Troubleshooting
PROBLEM
Does not work
•
•
•
Refrigerator
•
runs continu-
•
ously
•
•
•
Internal tempera-
•
ture not cold
•
enough
•
•
•
•
•
•
•
Ice formation on
•
the inner rear
•
wall
•
•
Water is leaking
•
from the refrig-
erator
Unit is vibrat-
•
ing or there is a
noise
•
•
POSSIBLE CAUSE
No power to unit
Power cord is unplugged
Wrong voltage is being used
Temperature set too low
Door is not closed
Hot food inserted
Door opened too long or too often
Close proximity to heat source or
direct sunlight
No power to unit
Power cord is unplugged
Temperature control set too high
(too warm)
Door is not closed
Hot food inserted
Door opened too long or too often
Air fl ow obstruction
Wrong voltage is being used
Close proximity to heat source or
direct sunlight
The door is not sealing properly
The door is frequently opened of
left open too long
The food in the refrigerator is
warm
The dish is touching the inner
back wall
Water pipe is clogged and defrost
water drips over the channel
The appliance is not level or is not
installed on a fi rm solid base/fl oor
Appliance is touching a wall or
other kitchen appliances are
standing next to it
The accessories inside the appli-
ance are not installed correctly.
Bottles or cans may be touching
each other causing rattling and/or
vibrations
Tel: 1-800-26-
•
Check connection of power cord to
power source
•
Plug in the unit
•
Use proper voltage
•
Set temperature higher
•
Close door securely
•
Be sure food is at room temperature
before inserting
•
Minimize door openings/duration
•
Do not place unit close to heat sourc-
es or direct sunlight
•
Check connection of power cord to
power source
•
Plug in unit
•
Check setting and increase as need-
ed
•
Close door securely
•
Be sure that food is at room tempera-
ture
•
Minimize door openings/duration
•
Allow room for air to circulate around
the unit
•
Use proper voltage
•
Do not place unit close to heat sourc-
es or direct sunlight
•
Ensure the door is sealing properly
•
Only open the door when necessary
•
Cool food to room temperature be-
fore inserting it in the refrigerator
•
Ensure nothing is touching the back
wall
•
Clean the clogged pipe with a pipe
cleaner or plastic straw
•
Always make sure that the appliance
is leveled and installed on a fi rm solid
base/fl oor
•
The appliance should not touch any
wall or other kitchen appliance
•
Ensure the accessories inside the
appliance are correctly installed so
that they do not touch each other
causing rattling or vibrations
8
(1-800-263-2629)
SOLUTION