Tabla de contenido
INTRODUCTION
The CUB12R is a straight forward easy to use tube combo amplifier,
featuring 3 x ECC83/12AX7 preamp tubes and 2 x EL84 output tubes.
Its 15W Class A/B Push/Pull circuitry pumps out classic tube tones
through a 12" Celestion speaker.
The Chocolate Brown fascia panel features vintage style, simplicity and is
home to the CUB12R's unique Power Scaling Inputs. Use the 15W Input
to get full on tube power, (for gigging or just to blow away the
neighbours!
)
Or, leaving all your control settings as they are, plug into the <1W Input
for quieter bedroom playing or recording.
Also on the fascia are the controls for EQ ,Volume, Gain and the
Footswitchable, Digital Reverb.
The base of the cabinet is fitted with a special Tilting Mechanism, allowing
the cabinet to be used in the upright or tilted back positions.
The rear panel features Footswitch and FX Send & Return sockets and also there is a 8-16 Ohm extension cabinet
socket, to which any of the cabinets in the Laney range can be connected - let your Cub get its claws out with one
of the Laney GS412 range, you will be amazed!
After flicking ON the chrome toggle switch, set the tone, volume & EQ controls to your taste, wind up the gain and
you are ready to Rock.
We hope you get a kick out of using your CUB12R, we certainly did designing and making it.
Best wishes from all at Laney
9
Tabla de contenido
