Enlaces rápidos
SUPERBones
Assembly Instructions
En
Instrucciones de montaje
Es
Instructions d'assemblage
Fr
Accessories
#
3040
Bike Beam
3 bikes
3 bicicletas
3 vélos
#3033
Wheel Straps
#802
1.800.783.7257
http://www.saris.com/en/vehicle-racks.html
Max=
35 lbs/16kg
Max=
105lbs/48kg
For relevant patents, see www.saris.com/patents
Für relevent Patente siehe www.saris.com/patents
View our installation video at
Video
http://www.saris.com/en/instructional-videos-1.html
Fit
Guide
Manuales relacionados para Saris SUPERBones
Resumen de contenidos para Saris SUPERBones
- Página 1 Instrucciones de montaje 3 bicicletas Instructions d’assemblage 3 vélos #802 Guide 1.800.783.7257 http://www.saris.com/en/vehicle-racks.html Max= Accessories 35 lbs/16kg 3040 #3033 Bike Beam Wheel Straps Max= 105lbs/48kg For relevant patents, see www.saris.com/patents Für relevent Patente siehe www.saris.com/patents View our installation video at Video http://www.saris.com/en/instructional-videos-1.html...
-
Página 2: Preparing For Installation
Preparing for installation Step 1: Reference fit guide, www.saris.com, to determine strap placement and lower foot position. *Rack can not be mounted without first confriming compatibility. If strap/ hook placement needs adjustment, see instruction in Appendix A. Guide Step 2: Clean surface of vehicle which will be in contact with rack. - Página 3 Step 4: Adjust the Arms. 4a Lift lock lever to release arms 4b Rotate arm into general position to place on car 4c close lock lever 4d repeat with 2nd arm Note: Arms must be slightly above Horizontal. Install Rack on Vehicle Step 5: Place rack onto vehicle.
- Página 4 Step 6: Re-adjust upper legs so rack spline is directly above with vehicle bumper. Step 7: Attach top hooks. 7a push and hold “free” lever to extend straps. 7b Secure hooks in hinge line of vehicle. 7c Push and hold “free” lever to take out strap slack. **See fit guide for hatch hugger compatibility.
- Página 5 Step 9: Tighten all straps by opening and closing free lever to activate ratchet mechanism. Tighten upper straps first and finish with lower straps. Load Bikes Step 1: Fold up anti-sways. Step 2: Place bikes on rack with heaviest/biggest bike closest to vehicle.
- Página 6 Step 3: Tighten hold down straps over bike’s top tube. Step 4: If bike spacing adjustment, rotate anti-sway strap as needed. 4a tighten anti-sway strap onto seat post tube. Step 5: Once bikes are loaded recheck strap tension and tighten upper, and lower straps as necessary.
- Página 7 Step 6: Lock rack to vehicle. 6a To lock upper and lower legs, Insert key and turn to locked position. Step 7: Lock bike to rack. 7a To lock bike to rack, wrap locking cable over bike’s top tube and insert into lock slot. 7b Insert key and turn to locked position.
- Página 8 Step 2: Remove upper and lower hooks. 2a Push and hold free lever on upper leg to release strap tension. 2b Repeat on lower leg. Step 3: Retract strap. Guide strap into leg. Step 4: Fold flat for storage.
- Página 9 Appendix A Strap/Hook Placement Pull back sleeve covering hook attachment. Pinch strap and slide through opening on hook to remove hook. Remove sleeve.
- Página 10 Feed strap through leg to desired position. Pull sleeve over hook attachment strap and re-attach hook.
- Página 11 Saris Product or part, freight prepaid, to Saris at the address below. Please contact our customer service department prior to return to get a return authorization number. Repair or replacement of a defective Saris product or refund of the purchase price, shall be the sole remedy of the buyer under this warranty, and in no event shall Saris be liable for incidental or consequential damages, losses or expenses.
- Página 12 ES PROPIETARIO DEL PRODUCTO. Algunos estados no permiten limitaciones sobre la duración de una garantía implícita, por tanto es posible que la limitación anterior no sea aplica- ble a usted. A su criterio, Saris reparará, sustituirá o devolverá el precio de compra de cualquier producto Saris que sea defectuoso o no sea conforme a esta garantía bajo un uso y servicio normales.
- Página 13 Garantie : Saris Cycling Group, Inc. (« Saris ») garantit un produit Saris exempt de tout défaut pièces et main-d’œuvre, durant toute la période pendant laquelle vous le possédez. Cette garantie ne peut être étendue que pour l’acheteur d’origine. Elle ne s’applique pas aux pièces s’usant du fait d’une utilisation normale ou endommagées par une mauvaise utilisation, une util- isation abusive, une négligence, un accident ou des modifications non autorisées.