Assembling the throttle
N.B.
The throttle should only be used on private roads.
01
Remove the left/right hand grip with the help of a lever and a little lubricant if necessary.
02
Loosen the screw on the brake lever and pull the lever right out of the handlebars.
03
Loosen the LCD screen and move it towards the centre of the handlebars.
04
Insert the throttle, brake lever and hand grip in this order, leaving a gap between the LCD screen and the throttle.
05
Tighten the brake, throttle and LCD screen.
06
Connect the throttle to the connector in accordance with the position of the plugs (male - female).
02
58
LEVER
!