Important Safety Instructions - Fellowes Powershred P-30C Manual De Instrucciones

A.
B.
C.
D.
E.
For safety reasons, shredder will operate
only if the shredder head is in correct
position and used with supplied basket.
CAPABILITIES
Will shred: Paper, plastic credit cards and staples
Will not shred: Unopened junk mail, continuous forms, adhesive labels,
transparencies, newspaper, CD/DVDs, cardboard, paper clips, laminates, file folders,
X-rays or plastic other than noted above
Paper shred size:
Cross-Cut ........................................................5/32 in. x 1-3/16 in. (4mm x 34mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
in the instruction manual. Read the entire instruction manual
before operating shredders.
paper entry. Always set to off or unplug when not in use.
away from shredder openings. If object enters top opening,
switch to Reverse (
DO NOT use aerosol products, petroleum based or aerosol
lubricants on or near shredder. DO NOT USE "CANNED AIR" OR
"AIR DUSTERS" ON SHREDDER. Vapors from propellants and
petroleum based lubricants may combust causing serious injury.
shredder. Do not place near or over heat source or water.
2
F.
) to back out object.
KEY
A. Shredder head F. Control switch and LEDs
B. Paper/card entry
C. See safety instructions below
D. Bin
E. Window
Maximum:
Sheets per pass .....................................................................................................6*
Cards per pass .......................................................................................................1*
Paper width .....................................................................................8.7 in. (220mm)
*8.5"x11", 20lb., (75g) paper at 120V, 60Hz, 1.6Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Maximum recommended daily usage
rates: 30 sheets; 5 cards.
of the voltage and amperage designated on the label. The grounded outlet
Energy converters, transformers, or extension cords should not be used
with this product.
ENGLISH
Model P-30C
1. Forward
2. Auto-On
3. Off
4. Reverse