Resumen de contenidos para Kraus KHT301-18
- Página 1 INSTALLATION GUIDE StandardPRO Thick Deck Stainless Steel Top Mount Kitchen Sink KHT301-18 / KHT301-18/5.5 / KHT301-25 / KHT300-33 / KHT302-33 / KHT301-22L / KHT301-25L www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. October 26, 2020...
- Página 2 Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / [email protected]...
- Página 3 Toll-Free: 800-775-0703 or [email protected] The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
-
Página 4: Tools You Will Need
Destornillador de estrella (Phillips) Espátula Lápiz Scissors Screwdriver Tijeras Destornillador NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with countertop materials other than wood, marble or granite. Parts List Cut-Out Template · · Mounting Hardware ·... - Página 5 (838mm) R 3/8" R 3/8" (10mm) (10mm) Model #: KHT300-33 Model #: KHT301-18 Sink Dimensions: 33” x 22” x 10” Sink Dimensions: 18” x 18” x 10” Min Cabinet Size: 36” Min Cabinet Size: 20” Matching Grid: KBG-300-33 Matching Grid: KBG-301-18...
- Página 6 Dimensions: Ø 1 3/8" Ø 1 3/8" 3 1/2" (35mm) (35mm) (90mm) 3 1/2" 3 1/2" (90mm) (90mm) R 3/8" R 0" 23" R 1/8" (584mm) R 1/8" 23" (584mm) (10mm) (0mm) (2.5mm) (2.5mm) 25" (635mm) 25" (635mm) R 3/8" R 1/8"...
- Página 7 Step 1. Position Template · Check the cut-out template against the actual sink to ensure a proper sized cut-out. Place the cut-out template in the desired location on the countertop. · NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
- Página 8 Step 2. Trace Template · Trace template on countertop with a pencil.
- Página 9 Step 3. Cut Countertop · Cut the opening in the countertop by carefully following the traced line. NOTE: Please use the appropriate saw that best fits your countertop material.
- Página 10 Step 4. Attach Mounting Hardware · Attach mounting hardware to the prongs protruding from the underside of the sink rim. · Make sure the hooked side of the mounting clip is facing away from the sink. See Details Push...
- Página 11 Step 5. Apply Silicone or Plumber's Putty · Clean and dry the surface around the opening of the sink. · Turn the unit upside down to apply sealant. Apply silicone-based sealant (not included) underneath the edge of the sink.
- Página 12 Step 6. Secure Sink to Countertop · Insert the sink into the opening, check the alignment of the sink to the cutout in the countertop and press firmly. · Tighten the screws in the front of the sink, followed by the ones in the back and on the sides of the sink. ·...
- Página 13 Step 7. Install Plumbing Fixtures · Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer's instructions. Run water into sink and check for leaks. · Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2 and with CUPC ·...
- Página 14 Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
- Página 15 Esta garantía no se aplica a los productos que no se hayan instalado u operado de acuerdo con las instrucciones provistas por Kraus y todas las reglas, regulaciones y legislación aplicables relacionadas con dichas instalaciones.
- Página 16 Toll-free 800-775-0703 [email protected] If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at / Si usted es un contratista de plomería o distribuidor comercial, póngase en contacto con un representante profesional de Kraus al: Kraus USA, Inc.
- Página 17 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...