•
If the drainage tank is dirty, wash it with cold or lukewarm water. Do
not use detergent, scouring pads, chemically treated dust cloths,
gasoline, benzene, thinner, or other solvents, as these can scratch and
damage the tank and cause water leakage.
•
When replacing the drainage tank, press the tank firmly into place
with both hands. If the tank is not positioned properly, the "TANK FULL"
sensor will be activated, and the dehumidifier will not operate.
Continuous Water Drainage
The unit features a continuous drainage port. Using a plastic pipe (with an
inner diameter of 10mm). Take out the water tank and put the drainpipe
over the water outlet of the unit. Put the water tank back in place and guide
the drainpipe through the hole of the water tank. The water in the drainage
tank can be continuously drained out from the continuous port on the unit.
CLEANING AND MAINTENANCE
•
Wipe it with a soft damp cloth.
•
Open the inlet grill firstly and remove the air filter
•
Run a vacuum cleaner lightly over the surface of the air filter to remove
dirt. If the air filter is exceptionally dirty, wash it with warm water and a
mild cleanser and dry thoroughly.
•
Insert the filter into the grill smoothly, and place the inlet grill into right place.
Dehumidifier
EN
5