Operation; Adding.microbes; Routine.maintenance - Mi-T-M BIO-20R-0M10 Manual Del Usuario

ADDING.MICROBES:

1. Add inoculations of the Mi-T-M prepackaged microbes into the first chamber of the Biological System.
2. Begin your normal cleaning operation.
3. If using dry bacteria, continue inoculations on a monthly basis to ensure the Bio-System is operating at optimum
efficiency. If using liquid bacteria, inject bacteria at least once daily, with a sufficient dose to maintain a healthy
colony.
4. Monitor the system closely the first few days to ensure smooth operation. See Troubleshooting if problems occur.
The Mi-T-M microbes are most active and effective when the water temperature is between 70°F and 00°F. For climates
where freezing temperatures are experienced, the Biological System should be enclosed in a heated room.

ROUTINE.MAINTENANCE:

. Pits should be kept free from large amounts of sludge.
2. For most applications, four 500 mL Mi-T-M liquid microbes should be added to the system each 30 days to ensure a
healthy colony growth in the Biological System. The media pack should feel "slimy" to the touch when the microbe
colony is established. (Some applications may require more or less microbes depending on the contaminant
level.)
3. The pH of the water should not be lower than 5.5 or higher than 8.5 at any given time.
4. If soap is necessary for washing, the soap should be of a neutral pH (approximately 7).
6

OPERATION

MAINTENANCE
Operator's Manual