Scuf Trigger Covers; Scuf Adjustable Hair Trigger - Scuf Gaming INFINITY PRO Guía De Producto

SCUF Trigger Covers

Step 1 To remove the trigger cover, push the trigger down on the Quick Shift Trigger
Stop.
Step 2 Lift the bottom of the cover straight up to separate from the trigger
mechanism.
Step 3 To replace the trigger cover, push the trigger down on the Quick Shift Trigger
Stop, then snap the top part of the cover on first, then tilt the cover down to snap on
the bottom.
1 1 2

SCUF Adjustable Hair Trigger

Step 1 Remove the short trigger cover or trigger extender.
Step 2 Insert the 0.9mm SCUF key into the adjustable screw.
Step 3 With trigger stops off turn the 0.9mm SCUF key two full clockwise turns to
tighten and activate the adjustable hair trigger.
Step 4 Turn the key counterclockwise to loosen and fine tune the adjustable hair
trigger.
Note: It is recommended to adjust the hair triggers in-game to adjust to preference.
Tighten the adjustable hair trigger in-game until the weapon fires, then loosen slightly
to playing preference.
Step 5 To turn the adjustable hair trigger off, Insert the 0.9mm SCUF key into the
adjustable screw on the top of the trigger mechanism and turn counterclockwise until
the top of the screw is flush against the top of the trigger mechanism.
Note: To adjust the hair triggers you must remove the trigger cover or trigger extenders
Trigger Cover Removal instructions above.
|
S C U F I N FI N I TY P R O 4
4PS