Tabla de contenido
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Latches
Loquets
Lengüetas
Rear Belt
Cover
Couvercle de
la courroie
Cubierta de
la correa
trasera
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Before servicing any parts, disconnect
vacuum cleaner from electrical outlet.
Place paper under nozzle any time
lower plate is removed to protect floor.
Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
Release lower plate by pressing two
(2) latches inward.
Remove lower plate and remove any
residue that may exist in belt area.
Close the rear belt cover and reinstall
lower plate by hooking front end of
lower plate into slots on front of
nozzle housing.
Make sure all wires are routed
properly and not pinched.
Press lower plate into place then
push two (2) latches outward.
- 26 -
Tabla de contenido
