Malfunctions are often just caused due to minor problems. Before contacting our customer service, please check the table below:
Problem
Radio or TV reception is interrupted
during microwave operation.
The appliance is not supplied with
electricity; the display is black.
" " will flash in the display.
The appliance does not start oper-
ation. The display shows a readout
other than the current time.
All controls are locked.
The turntable causes a scratching or
abradant noise.
The operation is terminated without
any obvious reason.
Technical Data
Model:.................................................................................PC-MWG 1175
Power supply:....................................................................... 230 V~, 50 Hz
Power consumption:
Microwave: ................................................................................. 1280 W
Grill: ............................................................................................ 1000 W
Rated microwave power output: ....................................800 W / 2450 MHz
Cavity volume:...................................................................approx. 20 litres
Protection class: ........................................................................................
Net weight: .......................................................................approx. 11.25 kg
The right to make technical and design modifications in the course of
continuous product development remains reserved.
This appliance has been tested according to all relevant current CE
guidelines, such as electromagnetic compatibility and low voltage di-
rectives, and has been constructed in accordance with the latest safety
regulations.
64
PC-MWG 1175_IM
Troubleshooting
Possible Cause
The electromagnetic fields of this ap-
pliance might interfere with the pictures
and sound of special frequencies.
Defect wall socket.
There was a power failure.
The door is not properly closed.
The START button was not pressed
after selecting the function.
The child-proof lock is activated. The
display shows "
".
The display shows the current time. The
" " symbol will flash.
There are dirt or foreign objects in the
area of the turntable shaft.
The appliance is defect.
Notes / Solution
This is normal and not a malfunction. Position the appliances
further away from each other.
Try another wall socket.
Check the main fuse in your household.
Set the clock again.
Check if there are objects or food remains jammed in the door.
Press the START button to start or continue operation. Press the
STOP / CANCEL button to cancel the program.
Press and hold the STOP / CANCEL button for 3 seconds to
unlock the appliance. You will hear a signal tone.
An automatic start mode is programmed. You can see the
start time by pressing the TIMER / CLOCK button. Press the
STOP / CANCEL- button to cancel the program.
Remove possible objects and food remains as described under
"Cleaning".
Please contact our customer service.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of re-utilisation of
electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be
obtained from your local authority.
18.04.19