Specifications & Technical Data; Name Of Parts; Tool Specifications; Fastener Specifications - Max GS683RH-EX Manual De Operaciones Y Mantenimiento

2. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS

q w
t
e
!0
!1 !2
!5 !8
!6
!9
!7
@0
NOTE: The triangle symbol marked as

2. TOOL SPECIFICATIONS

PRODUCT NO. GS683RH-EX
HEIGHT 15˝ (382 mm)
WIDTH 4-3/8˝ (111 mm)
LENGTH 15˝ (379 mm)
7.8 lbs. (3.5 kg)
WEIGHT
(including Fuel Cell and Battery)
LOADING CAPACITY 32 nails (1 strip)
Battery JP606H for
BATTERY
MAX Cordless Fastening System
BATTERY CAPACITY 6V DC, 1.5 Ah
Charger JC610M for MAX gas
CHARGER
nailer (AC adapter included)
POWER SOURCE 100-240V AC, 50 or 60 Hz
POWER CONSUMPTION
8VA (10V 800mA)
(Rated output)
CHARGING TIME 150 minutes at maximum
Carrying case,
ACCESSORIES
Battery, Charger
TEMPERATURE
-5˚C (23˚F) to 49˚C (120˚F)
RANGE FOR USE
4. TECHNICAL DATA
q NOISE
A-weighted single-event sound power level ------ LWA, 1s, d 103.9 dB
A-weighted single-event emission sound pressure level at work station ------ L p A , 1s, d 100.5 dB
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value ＝ 4.04 m/s
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-
system when using the tool. An influence to the hand-arm-system when using the tool will, for example,
depend on the gripping force, the contact pressure force, the working direction, the adjustment of mains
supply, the workpiece, the workpiece support.
r
y
u
i
!4
@4
!3
@1
@2
@3
"▽" following its tool serial number indicates that safety yoke is equipped with this tool.
GS683CH-EX
15-3/8˝ (391 mm)
4-3/8˝ (110 mm)
13-3/8˝ (340mm)
40 nails (1 strip)
2
q Air Filter Cover
w Fuel Cover
e Body
r LED
t Trigger
y Battery
u Hook
i Nail Stopper
o Adjustment Dial
(Nail Depth)
!0 Contact Arm
!1 Pusher Holder

3. FASTENER SPECIFICATIONS

PRODUCT NO.
NAIL LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
COLLATION ANGLE
HEAD
11
!2 Pusher
!3 Magazine
!4 Tail Cover
!5 Pack Cap
!6 Terminal Block
!7 Battery (JP606H)
!8 Battery Setting Hollow
!9 Jack
@0 Power Cord
@1 Charger (JC610M)
@2 Power Plug
@3 AC Adapter
@4 Contact Tip (Option)
o
GS683RH-EX GS683CH-EX
2˝ to 3-1/4˝ (50 to 83 mm)
.113˝ to .131˝ (2.9 to 3.3 mm)
Smooth, Ring, Screw
.267˝ to .295˝ .256˝ to .303˝
(6.8 to 7.5 mm) (6.5 to 7.7 mm)
21 degree 34 degree
Full round head Clipped head