Filter System Cleaning - PRECITEC POLYTEC MSA23.003 Manual De Instrucciones

Filter material is produced in accordance with current occupational safety and disposal regulations
and meets relevant requirements.
Remove vacuum grid (front filter) and clean by removing coarse dirt and dust. In case the net is torn,
it is recommended to change it.
Put your fingers inside the hole and remove the filter cover plate from work area by pulling to front
sinuously. Clean this part from coarse dirt and dust in the same way.
Remove fibre filter from its location and clean it by shaking, vacuuming with vacuum cleaner,
washing or change it depending on its level of contamination.
Remove the filter support plate and clear dust if it necessary.
Lastly, remove the complete frame from the body along with Z-Line filter and clean these filters by
shaking, vacuuming with vacuum cleaner or change them.
Re-assembly is done from bottom to the top; starts with Z-line cartridge filter and ends with vacuum
grid. We kindly request you to pay attention that all parts are placed on the frame in correct order
and in the right way.
Polishing machines POLYTEC by PRECITEC® / MSA23.003 - MSA23.004 / User manual
Ensure that filters are placed correctly in accordance with the
photo in the previous page.
5.4.2

FILTER SYSTEM CLEANING

Do not squeeze washed filter layers!
Insufficient cleaning or rare changing of filter layers may cause
damages on vacuum system.
25