Startup Soundracer, P - SoundRacer SR0101V8AA Manual De Instrucciones

1. Startup SoundRacer
1. Apply the parking brake and set the gear
selector in neutral.
2. Place SoundRacer in the cigarette
lighter/12V/24V socket.
The display indicating FM frequency should
light up automatically. If not, the ignition key
has to be turned to the position where power
is applied to the socket. You will see the
display light up when power is on.
3. Connect the enclosed stereo cable to the car
AUX input and the SoundRacer AUX
connector. Select AUX input on the radio.
If the car has no AUX input, then activate the
FM receiver and set it to a frequency where
no radio station is heard. Press the + or –
button on SoundRacer to set the same
frequency as on the FM receiver.
Now you should hear an idling engine sound.
Adjust the volume on the radio so that the
sound is clearly heard.
4. Start the engine and rev it up to 2500-
3000rpm (revolutions per minute) by quickly
pressing down the throttle and then release it.
You should hear a short beep in the speakers
3