Troubleshooting - Clatronic KB 3481 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
5. Set the switch to ~ AC.
6. Set the switch to COLD for cooling and to HOT for keeping
warm.
Connection to the direct current
1. Remove the power cord for the alternating current, if neces-
sary.
2. Turn on the engine of the motor vehicle.
3. Plug the power cord for direct current into the
socket on the appliance. (See Fig.)
4. Connect the appliance to the cigarette lighter in the motor
vehicle.
5. Set the switch to
DC.
6. Set the switch to COLD for cooling or to HOT for keeping
warm.
NOTE:
Save the battery of your motor vehicle. Only run the appli-
ance in the motor vehicle while the engine is running.
Terminating operation
There is no automatic shut-off. The appliance runs permanently
while it is connected to a power supply and switched on.
1. Set both switches to the "OFF" position.
2. Unplug the power cord from the socket or the cigarette
lighter.
3. Unplug the power cord from the appliance.
Cleaning
WARNING:
Always unplug the power cord from the appliance and
from the socket / the cigarette lighter!
Never immerse the appliance in water! Otherwise this
might result in an electric shock or fire.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
The lid is removable. Pull the lid upwards out of the holder.
Use a moist towel to clean the inside and the outside. You
may add a dishwashing liquid to the towel.
Dry it with a cloth afterwards.
Fasten the lid back into the holder.
Storage
Clean the appliance as described and allow it to dry.
We recommend that you keep the appliance in the original
packaging if it will not be used for long periods.
Always store the appliance out of the reach of children in a
dry, well ventilated place.
Appliance is not functioning
Possible cause:
The switch setting has not been selected correctly.
Remedy:
Check the switch setting.
Possible cause:
DC
There is no current being supplied to the appliance.
Remedy:
Check the connection to the energy source.
Check the domestic power socket with a different appli-
ance.
Check the fusebox.
Is the connector plugged in correctly into the appliance and
into the energy source?
Does the cigarette lighter of your motor vehicle work
without a problem?
Appliance does not function with direct current
Possible cause:
The fuse in the plug of the 12 V power cord is faulty.
Remedy:
Replace the fuse. You can obtain one from a specialized dealer.
Possible cause:
The cigarette lighter of your motor vehicle is faulty.
Remedy:
Contact a specialist for motor vehicles.
The appliance shuts off during operation
Possible cause:
Inadequate ventilation.
Remedy:
Keep the ventilation slots free
Position the appliance so that the air may circulate freely.
The appliance is faulty.
Remedy:
Contact our service or a specialist.

Troubleshooting

25
Tabla de contenido

Solución de problemas

loading

Tabla de contenido