Premier SX-4659DSD Manual De Instrucciones página 37

System Setup
3 DIGITAL DECOLDER SETUP
3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL
and FR speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR
speaker.
MIX- MONO: The player outputs the average signal of the left-channel and right-
channel audio via the FL speaker and the FR speaker.
NOTE: This function only applies to the ENCODER AC -3 encoded 2-channel discs.
3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you
can adjust the dynamic value up to avoid losing sound details resulting from the low
volume.
4 VIDEO SETUP PAGE
4.1 VIDEO OUTPUT
CVBS: Set video output to S-Video if the S-Video connection is made.
YUV: Set video output in analog component video format if the component video outputs
are used.
Y Pb Pr: Set video output as progressive YUV signals if the component video outputs
are used.
NOTE: If the composite video is your favorite, just make composite video connection
only. The composite video output is always active whichever option you choose in this
setting entry.
If the video setting differs from the actual video connection (except composite video),
you may get no image or very poor image on the TV. In such case, you need to reset this
setting item for an appropriate video output mode or press [V-MODE] on the remote
control until the output image becomes normal.
4.2 COLOR SETTING
4.2.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
4.2.2 BRIGHTNESS, CONTRAST, HUE and TINT
Enter these items respectively, use direction key [ ]/[ ] to adjust the value, then press
[ENTER] to confirm it.
5 PREFERENCE PAGE
If there's no disc in the disc tray, the disc tray is open or the disc in the disc tray is
stopped, this item is available.
Page 11