Operation; Before Switching On - Beurer MC3000 Instrucciones De Uso

Step 4:
6.

Operation

Warning!
• Before using the device for the first time, read the
'Safety notes' section.
Safety notes, pages 2 and 3
w

Before switching on

• Wear comfortable clothes during the massage.
• Remove all objects from your trouser pockets (e.g.
keys, pocket knife, mobile phone).
• Assume a comfortable, relaxed position.
• Always sit in the middle of the seat so that your
spine is positioned precisely between the massage
heads.
• The back cushion can be folded back during the
massage.
Flat position/upright position
The upright position can be adjusted
even when the massage function is
switched off.
> Connect the power supply unit to the chair using the connector
plug
> Plug the mains plug into a socket
> Switch on the massage chair using the on/off button
control element
The massage chair is now ready for operation.
Caution!
• If you experience irritation of any kind, stop
treatment immediately.
• The massage should feel pleasant and relaxing
at all times. If the massage is painful or
uncomfortable, stop the massage or change your
sitting position.
• Gently press your back against the back rest.
Now check whether the massage is comfortable.
• Press your weight harder against the back of the
chair if this still feels comfortable.
• If the device has not been used for a long period of
time, check that the device is functioning correctly
before use.
Putting the massage chair in the flat position
> Sit on the massage chair
> Pull the straps to release the back rest
> Push the back rest back with your back
This lowers the back rest and raises the leg rest at the same time.
Release the straps as soon as the desired position has been set
>
This locks the back rest again.
Putting the massage chair in the upright position
Pull the straps to release the back rest
>
Push on the leg rest with the legs and release the back rest
>
This raises the back rest and lowers the leg rest at the same time.
> Release the straps as soon as the desired position has been set
This locks the back rest again.
18
on the