Installation In Horizontal Sliding Windows - Hisense AP0819CR1W Instrucciones De Uso E Instalación

Insert
Align the tabs on the
with the slots in the vent panel.
adapter
Insert the
window exhaust adapter
opening in the vent panel.
NOTE: The window installation kit can be used with horizontal sliding windows between 18'' and 50'' wide.
Foam seal L
(Adhesive
type-shorter)
Cut the foam seal L(adhesive type) & M
(adhesive type-shorter)to the proper
length, and attach it to the window sash
and frame.
Cut the foam seal A(Non-adhesive type)
to the window width. Stuff the foam seal
A between the glass and the window to
prevent air and foreign objects from
getting into the room.
Slot
window exhaust
into the

Installation In Horizontal Sliding Windows

Foam seal M
(Adhesive
type-shorter)
A
Screw
Insert the screw in the hole in
the
window exhaust adapter
prevent the
window exhaust adapter
from sliding out of the vent opening.
F
Install the Window-lock bracket with a type F
screw as shown if you need.
9
to