PNI Escort HP 8500 Manual De Usuario página 10

Channel storage function
• Set the radio and select the channel you want to save.
• Briefly press the MEM/FUNC key followed immediately by long pressing
the RFG/M1 key (to save to the M1 memory).
• The M1-OK icon will appear on the screen for one second.
• All channel settings (modulation, norm, channel number, frequency
deviation, transmission power) will be saved in that memory.
• Repeat the procedure, changing the memory key (DW M2 for memory 2,
M3 AM/FM for memory 3, and M4 LOCK for memory 4) to save other
channels to those memories.
To call up a memory, proceed as follows:
• Briefly press the MEM/FUNC key immediately followed by briefly
pressing the RFG/M1 key (to call the M1 memory) or DW M2 (to call the
M2 memory) or M3 AM/FM (to call the M3 memory) or M4 LOCK (to
call M4 memory).
To exit memory mode, briefly press the CH UP SCAN or CH UP SCAN key.
Notes:
1. When you are on a certain memory (M1, M2, M3 or M4) you can change
the band, modulation or deviation (DW), but this information will not be
saved.
2. If you call up a certain memory, but no information has been saved in that
memory, the NC icon will be displayed on the screen.
3. To delete a memory, enter that memory (by briefly pressing MEM/FUNC
+ RFG/M1, for example). Then briefly press the MEM/FUNC key again
User manual 10