Changing Master Manager; Bypassing A 24 Hour Zone; Unable To Arm; Special Disarm Users - HIKVISION Pyronix MX Serie Guia Del Usuario

Changing Master Manager

1. Press t to change the Master Manager code or x to leave menu.
2. Enter the new Master Manager code then press t. The same parameters that were selected when setting up a new user
can now be edited for the Master Manager.

BYPASSING A 24 HOUR ZONE

1. Enter the Master Manager Menu.
2. Press x until the LCD displays 'BYPASS ZONES?' then press t.
3. Enter the 24 hour zone to be bypassed then press t. If multiple zones are to be bypassed, enter them one by one pressing
t in-between.
4. When finished press x.
Please note: Once the control panel is armed and then disarmed. The 24 hour zones will become active again.

UNABLE TO ARM

If 'Unable To Arm' is displayed, it indicates that an input is open and the area where the input is should be checked for open
windows, pets, movement etc.
If the problem cannot be solved contact your engineer, or bypass the input.

SPECIAL DISARM USERS

Special Disarm Users, are users that can signal disarm and special disarm.
Special Disarm Users are programmed the same as standard users, and are numbers 15-25 in the 'LEARN USER CODES KEYFOBS
& TAGS?' menu.

EXTENDED USER GUIDE

For an Extended User Guide, please scan the QR code, or to http://bit.ly/mx-ug
8