Denver WCT-9000WLAN Manual Del Usuario página 28

2. ON mode
● Turn the mode switch of the camera to ON
position, then the camera will start work after 10
seconds count down, meanwhile the red indicator
light will flash.
● Press the ON button to open the Wi-Fi switch of
the remote control. Once the Wi-Fi is opened, the
blue indicator light will flash until your phone
connectedit.
● Refer to the section 1.2~1.3 to connect your smart
phone to the camera wifi. After connected, the
camera will start to work.
2.1. You can operate the camera to take picture or
video via theAPP.
2.2. You can find all pictures or videos captured in
"File" (see below picture). And also you can
download all files to the photo album
without taking the Micro SD card out.
Take video
Take picture
ENG 27