Dupray SteamIron Plus Manual De Instrucciones página 9

RELEASING THE STEAM
Press the steam release button (A) on the iron's handle to release steam
or press the locking button (B) for a continuous steam flow.
NOTE:
The first time you use your steam generator iron, release steam for
1 minute to make sure there are no production deposit left in the iron.
NOTE:
The soleplate must be hot to prevent the steam from condensing
on the soleplate and dripping onto the garment.
REFILLING WITH WATER
When the low water indicator (5) comes on during usage and you would like to continue ironing, you will need to follow these steps:
Turn the boiler activation button off
and hold the steam release button (A)
to release all steam pressure inside
the boiler.
IMPORTANT:
Do not overfill with water. Leave space for steam!
WARNING:
If all steam pressure has not been released, steam may escape from the boiler cap when opening, use caution.
All manuals and user guides at all-guides.com
When all steam pressure is out, wait
10 minutes and turn the iron activation
button off and open the boiler cap (6).
Using the funnel, pour 1L (34 oz)
of water inside the boiler.
Refasten the boiler cap and refer to
the Turning the Machine On section
on page 7.
en
8