Use And Operation; Product Description; Operations Instructions; Maintenance - Kunft KSG-1876 Manual De Instrucciones

2. USE AND OPERATION

2.1. Product Description

This product provides easy and professional quality ironing at home.
Sheets, towels, jeans etc. can be ironed faster. The holes in the tip of
the iron release a jet of steam which softly smoothes away even the
most difficult creases.
APPLIANCE PARTS
1. Water Tank base
6
2. Water inlet cover
5
3. Iron insulating mat
4
4. Skirt
5. Body
3
6. Lamp cover
2
7. Steam Button
8. Top cover
1
9. Water supply line
10. Cord guard
11. Base top cover
12. Power cord
13. Bottom cover
14. Temperature Control Dial
15. Steam Button
16. Manual steam button
17. Temperature knob
15
14
18. Iron lamp cover
19. Power switch
20. No Water Indicator Light
21. Plate

2.2. Operations Instructions

INSTALLATION
Take the appliance out of the box and remove the packing. In order
to ensure sufficient ventilation, the distance between the iron and the
wall or other objects should be at least 15cm at the back and 15cm
on the side.
a) Place the appliance on a stable and heat-resistant surface
b) Twist off the tank
7 8
16 17 18
8
steam generator
c) Fill with tap water or demineralized water. The water tank capacity
is 2.0 liters. Fill the water tank with 1800-1900 ml of water and be
careful not to overfill it. If some water comes out or if the water tank
is too full, empty the tank slightly and dry the appliance thoroughly.
d) Insert the plug into the wall outlet and turn on the switch.
e) When the iron operating indicator goes out the appliance is ready
for use.
Note: During the whole time it is in use, the iron's indicator will turn
on and off in erratic intervals, this is normal.
f) Adjust the steam jet by turning the steam temperature dial.
To activate the steam jet, press the steam button.
9
To obtain a continuous jet of steam, use the continuous steam
10
lever. If the steam stops coming out, this is probably because there
is no more water in the tank. In order to continue ironing, follow
the instructions in the "SUPPLYING WATER WHILE OPERATING"
section.
11
Steaming Fabrics
12
Follow the "INSTRUCTIONS" from (a) to (f).
Place the iron vertically at a minimum distance of 20-30cm from
13
curtains or fabrics and press the steam button, then steam the fabrics
using a circular movement.
Note: be careful to check the compatibility of the fabric with this
kind of treatment by checking on the fabric label. The appliance has
20 19
Super-large capacity water tanks and can be used for long time.
When there is no water left in the tank, the indicator will turn on and
you must then add water to the tank.
Dry Ironing (without steam)
a) Place the appliance on a stable and heat-resistant surface
b) Turn on the iron using the on/off button which will light, as will the
iron operating indicator.
c) When the iron operating indicator goes out, the iron is ready for use
21

2.3. Maintenance

Servicing due to damage or faults caused by the formation of scale
are not covered by the guarantee.
This device must only be repaired by qualified technicians authorized
by specific centers.

3. TECHNICAL SPECIFICATIONS

Model no.
Rated voltage
Rated power input
EN
KSG-1876
KSG-1876
220-240V ~ 50/60Hz
2200W
9