NOTE: This reading may also occur in water is extremely dirty, or where there are heavy
silt or mud bottoms. Sonar is a sound signal that travels through water. Sonar will not
travel through air. Keep this in mind when using the fish finder, as the smallest bubble
between the sonar sensor and the water, will cause the unit not to operate correctly.
5.2 Fish show
If the finder determines that sonar has detected a fish, the display
will show a fish shaped icon.
The first column of fish indicators on the right of the display shows
the most current information. This column is then moved to the left
as a new reading is displayed Fish icon moved in every 5 seconds.
NOTE: The fish indicators move away from the right to the left
at a constant speed.
This motion in no way reflects actual movement of the fish.
Use the fish Depth lndicator to measure the fish's depth from the
sonar sensor. This can bedone by dividing the depth reading
by 10. This number represents the value of each box.
(Example, the depth is 20 m, the fish symbol appears in the 5th
boxfrom the top. This means the fish is10 m from the surface)
11.8
BAT.
M
11.8
BAT.
M
7