Hinkley 1524 Instrucciones De Instalación

Cover
Mounting Template
Drill a 3/32"
hole here
HINKLEY LIGHTING 33000 Pin Oak Parkway
Mounting Plate
Avon Lake, OH 44012
Installation Instructions
Square Deck Sconce | Item No. 1524
 Start Here
Unpacking
1. Unpack the xture from the box.
2. Remove the mounting plate from the back of the xture.
Mounting
1. Tape template in location where xture is to be mounted.
Make sure the template is straight.
2. Using a 3/32" diameter drill. Drill two holes at places
indicated.
3. Use 3/4" #8 pan head wood screws (supplied) to screw
the mounting plate onto the mounting surface.
Assembly
1. Wire the xture according to the transformer instructions.
2. Install the bulb, if applicable.
3. Slide the cover onto the mounting plate.
(p)800.442.5539 / (f ) 440.653.5555
Drill a 3/32"
hole here
www.hinkleylighting.com