Slime 40051 Guia De Inicio Rapido página 3

INFLATE TIRES
1. Screw valve connector onto tire's valve stem.
2. Plug power cord into 12 volt accessory power outlet.
3. Set target pressure value
4. Press on/off switch.
5. The inflator will stop at the pre-set value.
6. Press on/off switch again.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side
door jamb.
DIGITAL GAUGE OPERATING INSTRUCTIONS:
1. Hold the "+" or "–" button for approximately 5 seconds until the display flashes.
Set the required pressure using the "+" or "–" buttons, then wait 2–3 seconds. The
display will show the pressure value to which the tire will be inflated.
2. Push the ON/OFF button for the inflator to start. When the pressure gauge reach-
es the pre-set value, the inflator will automatically switch off.
3. The ON/OFF button can be used to override the present pressure value if required.