Idiomas disponibles
Idiomas disponibles
NOTE: Bolts must be threaded carefully one by one to ensure proper t. Avoid cross-threading.
Thread all bolts at least ¼ of the way, then tighten all.
Step 1
• Insert Upright into Base.
Secure with (3) 1m Bolts and
Washers.
Step 3
• Align holes on Hoop Base with
holes on Backboard and Upright.
Secure with (4) 2m Bolts.
Step 4
• Attach Net to Hoop.
Step 5
• Fill Base with sand (preferred) or
water and cover opening with Base
Cap.
Step 6
• Use Ball Needle and a hand pump
(not included) to in ate Ball.
1m Bolts (3)
Step 7
• Place NO SLAM DUNK label on front
of Base
Step 2
• Attach Backboard to Upright using
(1) 2m Bolt through the center hole
on the Backboard.
poolmaster.com
2
