Troubleshooting; Corrective Action - LF KOBALT KPM 1040B-03 Manual Del Usuario

TROUBLESHOOTING

WARNING
• Turn the mower off, remove the battery pack and wait for the blade to come to complete
stop before performing troubleshooting procedures.
PROBLEM
Tool does not work.
The mower cuts
unevenly
The mower does
not mulch properly
The far left Power
Indicator light
flashes
All three Power
Indicator lights are
off
POSSIBLE CAUSE
1. Low battery capacity.
2. The side rails are not
extended to their full
length and the clamps
are not locked in
position.
3. Battery pack overheating
1. Dull blade.
2. The blade is assembled
incorrectly.
1. Wet grass clippings are
sticking to the underside
of the deck.
2. The mower is set to cut
too much grass at once.
Low battery capacity.
Motor overheating or
Battery/tool overload, tool
has stopped working in
order to protect internal
circuits.
Battery pack is depleted.

CORRECTIVE ACTION

1. Charge the battery pack.
2. Fully extend the handle and lock both
clamps.
3. Wait for the battery pack to cool
down and try starting the mower
again.
1. Sharpen or replace the blade.
2. Reassemble the blade, following the
section "Installing the Blade" in this
manual.
1. Wait until the grass dries before
mowing.
2. Raise the deck to a higher cutting
height setting.
Charge the battery pack.
Wait for the tool/battery to cool down,
remove and reinstall the battery pack,
and try starting the mower again.
Charge the battery pack.
28