Installing Systemsoft Bea-Au-Obd; Installing Au Vehicle Data; Bea 060 Configuration - Bosch BEA 060 Manual Original

en 24 | BEA ��� | Operation
4.� Start-up of BEA ��� in stand-alone
mode
The following description of installation of System-
Soft BEA-AU-OBD and the AU vehicle data, as well as
BEA 060 configuration, only apply to BEA 060 stand-
alone mode.
4.�.1

Installing SystemSoft BEA-AU-OBD

i
Heed the system prerequisites before starting
installation.
i
Only plug in the Bluetooth USB adapter when promp-
ted to do so during software installation.
1. Close all open applications.
2. Insert the "SystemSoft BEA-AU-OBD" CD in the
DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\RBSETUP.EXE' (D = DVD drive letter).
 BEA set-up is started.
5. Confirm with <Continue>.
6. Heed and follow the instructions on the screen.
i
The Bluetooth driver is installed at the end of installa-
tion. During installation, the Bluetooth USB adapter
must be plugged in when prompted to do so.
7. Re-start the PC/Laptop to successfully conclude
installation.
"
BEA is installed.
4.�.2

Installing AU vehicle data

1. Close all open applications.
2. Insert the "CompacSoft AU" CD in the DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\RBSETUP.EXE' (D = DVD drive letter).
 Set-up is started.
5. Select the set-up language and confirm with <OK>.
6. Heed and follow the instructions on the screen.
"
CompacSoft AU data are installed.
i
The CompacSoft AU (AU vehicle data or AU mo-
torcycle data) are provided with copy protection.
Checking for CompacSoft AU (1 687 000 985 or 1
687 005 052) is performed. The original CD must
be inserted in the PC/Laptop drive for this check.
Always keep the original CD to hand at the exhaust
gas analyzer.
|
1 689 989 112 2012-11-26
All manuals and user guides at all-guides.com
4.�.�
After installing the BEA software, the device interface
of the BEA 060 has to be set. The BEA 060 can be con-
nected by way of either the USB connecting cable or
Bluetooth to a PC/Laptop.
1. Select "Start >> All programs >> Bosch >>
2. Select "Settings >> Device interfaces".
i
3. Configure the BEA 060 in the GAM Group
4. Start SystemSoft BEA-PC.
BEA ��� configuration
Diagnostics >> Central Device Communication" or
click onto " " in the task bar with the left mouse key.
 CDC – Central Device Communication is opened.
Pressing <F1> opens the Online Help for a display of
the most important information on interface setting.
(USB or Bluetooth).
 BEA 060 is ready for operation.
Robert Bosch GmbH