VonHaus 3000102 Manual De Instrucciones página 66

EN
OPERATION
Timer Memory/ Up/Downward Memory Display Indicator
Screen lock movement Positions Light
Activate the System: Touch the screen. The"---" will appear on the display. Then,
press and hold the "M" button for 3 seconds.
The current height will display, and you can start operating the system.
Height Adjustment: Press and hold the up button to lift the desk. Press and hold the
down button to lower the desk.
Timer: The timer is designed to inform users to stand up after a set period of time.
Press the "T" button to set the period of time. The display will flash "0.5 h" for 0.5
hour. Each press of the "T" button leads to a 0.5 hour increment. The maximal
setting of time is 2 hours.
When the display stops flashing, then the period of time is successfully set. And
the indicator light on the top right of panel will be on. When the set time is up, the
buzzer will beep to remind the users.
The timer will turn off automatically after a long beep. To cancel the timing, press "T"
button for 5 times until the display shows the current height and the indicator light is
off.
Memory Selling: Adjust the desk to your desired position. Press the "M" button,
then "S-" appears on the display. Press "1", "2" or "3". The memory is successfully
set. You can store up to 3 heights by repeating the same process.
Protective Standby Mode: If there is no operation for 1 minute, the system will enter
the protective standby mode.
To turn off the standby mode, press and hold the "M" button for 3 seconds.
You can also press and hold the "M" button for 3 seconds to activate the standby
mode, when you don't need to operate the system.