Diagnostics - aqprox appPCI300 Guía De Usuario

300Mbps Wireless N PCI Adapter – APPPCI300
in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in
Figure 3-2).
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the
highest priority and the same SSID as one of the found networks will be u
network. If the connection fails, the client adapter w
matches the SSID until an available network is found.

3.3 Diagnostics

The Diagnostics tab of the APPPCI300 Wireless N Client Utility (AWCU) provides
used to retrieve receiving and transmitting statistics. The Diagnostics tab does not require any
configuration.
The Diagnostics tab lists the following receiving and transmitting diagnostics for frames
received or transmitted by the wireless network adapter:
Multicast frames transmitted and received
Broadcast frames transmitted and received
Unicast frames transmitted and received
Total bytes transmitted and received
User's Guide
ill try the next highest priority profile that
English
sed to connect to the
buttons
59