Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warnings
The Manufacturer declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (Dir. 2003/10/EC, Dir. 2002/44/EC and Legislative Decree no. 81/2008) have to be carried out either by the end-
user or by the employer: supplying the adequate personal protective equipment, informing about working risks,
health surveillance, etc....
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory disor-
ders. In case of symptoms which could be referred to over-exposure, contact a specialist. These symptoms can
be torpor, loss of sensitivity, sharp pains, itching, strength reduction or loss, complexion discoloration or struc-
tural modifications of its surface. This usually happens to one's hands, wrists and fingers.
2.1.1
Results of the tests made according to the Laws
Risks due to the operator's contact with the noise and vibrations of the machine or tool.
NOISE LEVEL
-
Continuous A-weighted sound pressure level at the operator's ear (LpA) and sound power level of the tool
(LwA), both calculated according to the UNI EN ISO 3744 rules:
VIBRATIONS LEVEL
-
Average weighted hand-transmitted vibration value, in frequency, the user is exposed to, measured in compli-
ance with EN ISO 5349/1-2:
General warnings
•
Use the tool only with the accessories indicated by the Manufacturer.
•
Use the tool only from the ground, working in a stable and safe position.
•
Always use adequate clothing as called for by the job. Wear protective goggles and verify that your clothes are fitting to
the body. Do not wear ties, necklaces or belts or keep loose long hair which may get caught in the moving parts. Use
anti-sliding shoes and anti-perforation gloves.
•
Wear a noise-abatement headset.
•
Do not operate, service or repair the tool if you are under the influence of medicines, alcohol or drugs which could impair
your alertness or co-ordination.
•
Only well trained and qualified personnel - who have read the use and maintenance manual carefully - are allowed to
use the tool. The safety course must be administered by the employer.
•
Entrust or lend the tool only to people who are familiar with the instructions for use or trained by personnel authorized
by the employer.
•
Keep the tool out of the reach of children, as well as of people with disabilities or untrained in its use and keep it away
from animals.
•
The operator is the only responsible for injuries caused to other people or for damages caused to their belongings.
•
Do not use the tool when you are in an unstable position or off balance, on slipping surfaces (i.e. hills and/or wet
grass) or wherever there is no possibility of maintaining a stable balance (i.e. steep slopes).
•
Never use the tool while standing on a ladder.
•
Before any routine maintenance operations, read the Use and Maintenance Manual carefully. For any maintenance
operation which is not indicated in this manual, please contact one of the Service Points authorized by the Manufacturer.
•
Use the tool just for the purposes described in par. "Product description". Any other use may cause injuries.
•
Keep this manual with care and read it before any tool use.
•
Keep in perfect conditions all the danger and safety indications stickers.
•
Do not use petrol, solvents or other aggressive products to clean the tool.
•
Avoid working in bad weather conditions, such as in case of fog, rain, strong wind, hail storm, snow or ice.
•
Inhaling oil mist or wood dust could cause irritation or intoxication of the operator's breathing system. In case of pro-
longed problems, please contact a specialized doctor.
•
Before any maintenance, disconnect the air supply hose.
Carefully read the following instructions. Failure to follow them could cause serious damages.
Page 20
LpA
= 86 dBA - LwA = 98 dBA
eq
Min. a
= 2,0 m/s – Max a
heq
= 4,30 m/s
heq
Use and maintenance manual – Translation of
original Instruction.: 01, Date 17/01/2022
Capítulos
Tabla de contenido
