Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TX-SR705_SR_EnFrEs.book Page 9 Wednesday, May 30, 2007 4:00 PM
3
Use the Up and Down [
buttons to select "4. Satellite
Radio," and then press [ENTER].
The Satellite Radio menu appears.
4-4. Satellite Radio
SIRIUS Antenna Aiming
Satellite
SIRIUS ID
Adjust the position of the Sirius-
Connect Home antenna so that
the SAT/TER signal strength bar
is as long as possible.
Terrestrial (TER) signals are only avail-
able in certain areas.
So long as the signal strength is good,
you can enjoy SIRIUS Satellite Radio
by using either satellite or terrestrial
reception.
Notes:
• The SIRIUS information on the Satellite Radio screen
is only displayed when the Satellite Radio mode is set
to SIRIUS or XM/SIRIUS (see page 2).
• If you're using both XM Satellite Radio and SIRIUS
Satellite Radio and the Satellite mode is set to
XM/SIRIUS (see page 2), signal strength meters for
both systems appear on the same screen.
All manuals and user guides at all-guides.com
]/[
]
Terrestrial
- - - - - - - - - - - -
SIRIUS Satellite Radio Messages
The following messages may appear while using SIR-
IUS Satellite Radio.
❑ ACQUIRING
The SiriusConnect receiver is acquiring the signal or
no signal is present. Make sure the SiriusConnect
Home tuner is connected properly and that there are
no obstacles close by.
❑ ANTENNA ERROR
Make sure the SiriusConnect Home tuner is con-
nected properly.
❑ SUB UPDATED
Displayed while your subscription is being updated.
No operations can be performed until this message
has cleared.
❑ UPDATING XXX%
Displayed while the channel map is being updated.
Wait until the updating is complete.
❑ UPDATING
Displayed while the SiriusConnect receiver's firm-
ware is being updated.
❑ INVALID CHANNEL
Displayed if you select an unavailable channel.
❑ CALL SIRIUS
Displayed when you select a channel to which you
are not subscribed. Call SIRIUS if you want to sub-
scribe.
❑ CHECK SR TUNER
Displayed if the SiriusConnect receiver is not con-
nected. Make sure the SiriusConnect receiver is con-
nected properly, and make sure its AC adapter is
plugged in.
9
En-
Tabla de contenido
