FireFriend DF-6513 Manual Del Usuario página 3

Assembly
Attention: Never place the fire compartment in the fireplace when filled
to prevent Bio-Ethanol from being inadvertently spilled on parts of the
product or in its vicinity.
1. Mount the glass onto metal frame with screws.
2. Put the fireplace compartment into the fireplace
3. Make sure the device is placed on a smooth and level setup area.
4. Assembly platform must support a minimum of 10 kg. If it can't meet 10 kg,
additional support is required.
Adding Bio-Ethanol
1. Do not take out the fiber.
2. When adding Bio-Ethanol, please do not exceed the max sign in the burner
Igniting Bio-Ethanol
1. After filled with a sufficient amount of Bio-Ethanol, you can ignite the fire
compartment.
2. Mirror deflagration or darting flames may result. Do not light the fire from above; it
should be lighted from the side. Ensure to keep a safe distance from the device.
3. The fireplace can only to be use in rooms of adequate size. The room size should
amount to at least 66 m
height of 2.20 m.
4. In the process, ensure that it is not situated on heat-sensitive or flammable bases
and that no accumulation of heat can occur on ceilings and walls. For this purpose,
ensure the distance between the device and the room ceiling at least 1.8 meters.
5. Please keep minimum distance of 1 meter away from any burnable material and
objects.
Note: if you could not ignite the Bio-Ethanol in the fire compartment after repeated
attempts. It is possible that a significant portion of the alcohol has already evaporated;
thereby reducing it ignitability. In such case, you'd better wait a few minutes and then
dispose of the Bio-Ethanol, which is still in the fire compartment. Never dispose of it at
a collection point for hazardous substances.
3
, which corresponds to floor space of 30 m
2
2
with a room