Fanimation The Stonehill FP7953CH Manual Del Propietário página 11

How to Assemble the Blades and Light Kit Assembly(continued)
3. Remove one of the three screws in the motor
assembly. Slightly loosen the remaining two screws.
Assemble the adapter-switch housing assembly to
the motor assembly using the two key slots. Replace
the third screw and securely tighten all three screws.
(Figure 23)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
4. Connect the 2 single-pin connectors from the motor
assembly to the 2 single-pin connectors from the light kit
assembly. (Figure 24)
5. Remove the finial, trim cover, nut, flat washer and
rubber washer from post on light kit assembly.
(Figure 25)
6. Remove one of the three screws in the adapter-
switch housing assembly. Slightly loosen the remaining
two screws. Assemble the light kit assembly to the
adapter-switch housing assembly using the two key
slots. Replace the third screw and securely tighten all
three screws. (Figure 26)
7. Insert light bulbs into sockets. (Figure 27)
All manuals and user guides at all-guides.com
Motor
Assembly
11
Figure 23
Motor
Assembly
Figure 24
Rubber Washer
Light Kit
Assembly
Flat Washer
Nut
Figure 25
Figure 26
Figure 27
Adapter-Switch
Housing Assembly
Light Kit
Assembly
Light Kit
Assembly