OPERATING INSTRUCTIONS
f.
After disconnecting the AUX cable (U) close the cover to protect the ports from dust, dirt,
and moisture.
NOTE: The AUX port is for INPUT only. Do not connect headphones or speakers.
NOTE: Batteries of the connected devices cannot be charged via the AUX connection.
4. USB Power Ports
When a battery pack is installed or the unit is
connected to the AC power adaptor and the unit
is turned on, the USB power ports (P) and (O) will
supply charging power for low power devices such
as cell phones, MP3 players, etc. Immediately
disconnect the USB device after charging. Close
the rubber cover to protect the ports from dust, dirt,
and moisture.
NOTE: The USB power ports cannot be used for
audio playback. Audio playback is only possible via
Bluetooth or AUX connection.
5. To Install Clock Batteries
Your unit is equipped with memory function to store
the time and your preset radio stations. When the
unit is in the OFF position, this memory function is
powered by two clock batteries which need to be
installed in the unit.
a. Use a screwdriver (not included) to loosen and
remove (turn counterclockwise) the screw and
the clock battery door (S).
b. Install the clock batteries (V) observing the
correct polarity.
c.
Replace the battery door, insert the screw, and
tighten it clockwise.
NOTE: When changing the clock batteries, all settings will be erased. To avoid this, attach the
battery pack or plug in the power adaptor before replacing the clock batteries.
WARNING
• When replacing clock batteries, replace them with the same or equivalent type AAA.
Observe correct polarity (+ and –) when replacing batteries. Do not store or carry batteries
in such a way that metal objects can contact exposed battery terminals.
4
5
- +
- +
V
+ -
+ -
9
P
O
S
Screw