Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Do not over-tighten bolts-doing so many cause unnecessary damage to the wall.
CAUTION:
Avoid excessive torque.
CAUTION:
Do not release the wall plate until it is properly mounted and secured to the wall.
b Concrete/Brick Installation
NOTE:
The concrete anchors must be used for concrete installation.
1
Begin by placing the wall plate into position against the wall, using the bubble level to keep it level.
2
Mark off four holes to be used for securing the mount and place the wall
3
Next,drill holes using an electric drill and 12mm masonry bit 50mm deepth.
Insert a concrete anchor into to rach hole.
4
5
If necessary, a hammer can be used to liahtly tap each anchor into place so that they are flush with the
wall.
6
Once all of the anchors are in place ,move the wall plate back into position .
Attach the bolt into the washer(G) that is placed in the wall .
7
8
Do not tighten until all screws are in plate .
E
50mm
5mm
BALANCE-ADJUSTING
TENDING INSTRUCTION
Please check whether screws are fixed well each two months
If you have any other doubles regarding the products or the installation,please consult to the special
franchiser
F
G
50mm
12mm
Step2 Display bracket Installation
To ensure optimal installation,this kit includes various screws of differe diameters and lengths.
1
Place your TV screen down on a soft,flat surface,and locate the threaded mounting points that are
2
located on the back of the display.
Determine which screw (A/B/C)is of the correct length by carefully inserting a straw,or
3
toothpick,and mark how deep the mounting point is.
4
If your display has a curved back or a recessed thread mounting point.
5
According to the size of display's hole,choose the corresponding screw and hole on the rectangle washer,
then thread them in line as showed
Step3 Final Installation & adjustment
Hook the TV Rails over the top of the wall plate.The TV Rail could be tilted down by 10 degree. And
1
tighten the contral screws by driver to adjust the tilting hardness.
Lock the bracket by the safe lock bar.
2
D
A/B/C
Tabla de contenido
