Factory Default Settings And Bluetooth; About The Factory Default Settings; Resetting The Appliance; Switching Bluetooth On And Off - Boneco H700 Manual De Instrucciones

68

FACTORY DEFAULT SETTINGS AND BLUETOOTH

en

ABOUT THE FACTORY DEFAULT SETTINGS

If your BONECO appliance control system does not
function the way you are expecting, or if you would
like to delete all adjustments, you can reset the ap-
pliance to the factory settings. This deletes all ad-
justments and settings.
After the reset, the BONECO appliance has to
be paired with the smartphone again so that
the control system can continue working with the
app (see page 52).

RESETTING THE APPLIANCE

Press and hold the output regulator until the "Fd"
(Factory default) notice appears on the display.
Now the BONECO appliance is in the same state as
when it was first started.

SWITCHING BLUETOOTH ON AND OFF

Switching Bluetooth off:
1. Press and hold the output regulator for about 5
seconds until the "bt" notice flashes on the dis-
play.
2. Turn the output regulator until the display shows
"--" and confirm your selection by briefly pressing
the output regulator again.
3. Now Bluetooth is switched off.
To reactivate Bluetooth, you have to have the
smartphone paired again (see page 52).