Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Montagehinweise
30°
45°
60°
Assembly instructions
Istruzioni di montaggio
Instructions de montage
Instrucciones de montaje
Lightning protection / Equipotential bonding of the building
legislation must be observed. A safety gap of at least 1 m from any adjacent object that may be conductive must
Connections
The collectors are equipped with four screw connections (1 ¼"
compensators must be used as connection elements between the collectors in order to compensate the length ex-
to 10 collectors can be connected in series (ATTENTION:
ded so as to prevent damage to the manifold or absorber.
Hydraulic pipe line positioning
Caution: The collector connections and the input and output lines can reach very high temperatures during opera-
insulating material.
Collector angle / General notes
minimum angle of 25° and a maximum angle of 75°! The collector connections and the ventilation openings must
be protected against the penetration of water as well as against contamination through dust etc.
Warranty
Warranty claims can only be made if the supplier's own antifreeze has been used and maintenance has been car-
Installing the sensor
series farthest away from the pump.
12
EN
Tabla de contenido
