Premier ED-5427T Manual De Instrucciones página 14

All manuals and user guides at all-guides.com
- Set temperature control to ironing temperature.
- Inset the mains plug into the main supply.
- After the indicator light has gone out and come on again, you may start ironing. The indicator light will
go out from time to time during ironing.
STEAM-IRONING
~ Set the temperature control to position** for*** moderate steam and to*** for maximum steam. With
conventional steam irons, water may leak from the sole plate if a too low temperature has been selected.
~ Ensure that there is enough water in the water tank.
- Stand the iron on its heel
- Insert the mains plug into the wall socket.
- Wait a little while for the indicator light to go out and come on again.
- See the variable steam knob to adjust the steam,
DRY IRONING
~ Turn the variable steam knob to the position "0"(=no steam).
STORAGE
~ Remove the mains plug from the wall socket.
~ Pout any remaining water out of the water tank.
~ Set the steam knob to no steam position.
~ Stand the iron upright and let it cool down sufficiently.
CLEANING
~ Before cleaning the iron ensure it is disconnected from the power supply and has completely cooled
down.
~ Deposits on the sole plate may be removed with a rough cloth soaked in a vinegar/water solution.
~ The casting may be wiped with a damp cloth and then polished with a dry one.
~ Do not use abrasives on the sole plate.
~ Keep the sole plate smooth. Avoid hard contact with metal objects.
SPECIFICATIONS
Rated Voltage: AC110V
Frequency : 60Hz
Rated Output: 1000 Watts
P-3