Acon On Call Vivid Pal Manual Del Usuario página 36

plugged into meter data port then meter gives E-12 error message and
does not automatically turn to "PC" mode.
● When meter is in "PC" mode, meter does not turn to waiting for sample
application mode after strip is inserted into meter.
3. Run the On Call
instructions from the software kit for how to transfer the records.
4. During the data transfer, the meter will display "to"
and "PC". This indicates the data is being
transferred from the meter to the PC.
5. Once the data transfer is complete, the meter will
display "End" and "PC".
6. After data transfer from meter to PC is completed, press the <OK> button
to turn off the meter. If nothing else happens to meter 2 minutes after data
transfer from meter to PC is completed, the meter will automatically turns
off. In this case press both the <▲> and <▼> buttons to end "PC" mode
again.
See the package insert included with your On Call
Software Kit for detailed instructions.
All manuals and user guides at all-guides.com
®
Diabetes Management Software, and refer to the
34
®
Diabetes Management