FIGURE 2
2
2
4
Step 2:
Fasten the center connector with ring (#4) to the middle of the
legs (#2) by using bolts (#6). Keep the bolts loose.
See Figure 2.
Note:
The arrow marks on the center connector with ring (#4) should
coincide with Figure 2 to ensure proper assembly.
FIGURE 4
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other
solvents on the frame parts.
• Wash glass with mild soap and water, rinse thoroughly, and dry completely.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your table.
• When moving the table, remove the umbrella and lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected area
during off season periods.
Tempered glass has been used for increased strength and safety of your table. However, during windy conditions the
•
umbrella should be lowered and/or removed.
Warranty
• This product is covered by Courtyard Creations Inc. 3 years limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
Missing A Part?
No Need To Go Back To
No Need To Go Back To
The Store!
The store where you made your purchase
The store where you made your purchase
does not stock parts for this item
does not stock parts for this item.
if you need parts,
whether they are missing or damaged.
whether they are missing or damaged,
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Eastern Time Monday through Friday
V-3
All manuals and user guides at all-guides.com
6
2
2
STOP!
Missing A Part?
The Store
If you need parts,
Call Toll Free
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
For further assistance,
please visit us at
DON'T RETURN TO STORE!
STOP
FIGURE 3
Step 3:
Fasten the center connector with ring (#4) to the supports (#3)
by using bolts (#6). Make sure that all of the bolts have been
tightened completely. See Figure 3.
Step 4:
Turn the table to its upright position. See Figure 4.
Note:
To use an umbrella with this table, remove the plastic center
plug and put the umbrella pole through the table top and
center connector ring.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
7 6
4
3
3