Orbegozo VP 8600 Manual De Instrucciones página 18

VP 8600
- Fabrics such as velvet and wool, and accessories such as gloves, handbags, etc., will regain their ideal
appearance and textures just by running the iron close to the surface of the fabric and pressing the
steam button.
- Traces left on carpets by furniture can be removed by applying steam to the areas where the pile meets
and brushing lightly.
-If the mat is made of synthetic material, do not select a high temperature.
How to get a professional ironing finish
A normal iron generates only a small amount of steam. In this case, it is necessary to constantly steam
the products to eliminate wrinkles in the fabric being ironed.
A professional ironing system works quite differently. The fabric is first moistened with steam and then,
in a second phase, dry ironed in the usual way. This means that the smallest pleats are eliminated and
your clothes are ironed to perfection.
In the first phase (moistening the fabric with steam), hold the iron about 20 cm above the fabric and
press the steam button (4). Pass the iron over the garment in a circular motion so that the powerful jet of
steam moistens the fabric. Slightly wrinkled items require only a few moments of steaming. Although
very heavy fabrics or items with particularly difficult pleats should be more humid, steam should be
applied for a few more seconds.
During the second phase (dry ironing), check that the thermostat knob is in the correct position for the
type of fabric; dry iron the garment. The special ironing plate will prevent the fabrics from shining. Using
this ironing technique, and following the suggestions in the chart below, it is easy to give your garments
a truly professional ironing finish.
18