SBS TTACTIONCAMDG Manual Del Usuario página 4

UK
USER MANUAL
Please read carefully this manual before to start the
camera's use, to maximize its performance and extend the
life of the product.
APPEARANCE AND BUTTONS
1 Shutter button
2 LCD display
3 Power button
4 Lens
5 Indicator Light for charging (Red)
6 Microphone
7 Working Indicator Light (Blue)
8 Mode Switch
9 Micro USB port
10 Micro SD card slot
11 Reset button
LCD DISPLAY ILLUSTRATION
Turn on the Action Cam: the LCD will display the following
status and settings:
1 Camera mode
2 Video recording mode
3 Vehicle- mounted mode
4 SD card icon (displayed when loaded)
5 Resolution icon: in camera mode, HI stands for 5
Megapixels (2592x1944), and in video recording mode
or vehicle mounted mode, it stands for 720P (1280x720).
In camera mode LO stands for 1 Megapixel (1280x960),
and in video recording and vehicle mounted mode, it
stands for 640P (640x480).
6 Battery icon: current battery level
7 Counter: display up to 9999
8 Timer: display minutes and seconds
NOTE: the above icons may vary according to the status of
the Action Cam.
All manuals and user guides at all-guides.com
WORKING MODE FLOW CHART
After turn on the Camera, you can change the Power button/
Mode switch to switch the following modes in turn:
MODE SWITCH
In video recording and vehicle-mounted mode , press the
Shutter button to start recording, Working Indicator Light
flash and than press it again to stop; in camera mode, press
the Shutter button to take photo.
Use your Action Cam
When you use the Camera for the first time please:
1. Insert the micro SD or micro SDHC card (NOT
INCLUDED), as shown in the following picture. High speed
card at least Class 4 is recommended; 8Gb capacity SD
2. How to charge the battery. The Cam uses built-in
rechargeable lithium battery. When the Cam is off, connect
it to the PC by an USB cable to charge the battery. During
recharge, the charging light indicator will light on, will be off
when recharge completes.
Turn on/off
Turn on: press and hold
LCD displays "ON".
Turn off: press and hold the
LCD displays "OFF".
POWER BUTTON MODE SWITCH
POWER BUTTON
POWER BUTTON MODE SWITCH
allows to records about 1h of video,
16Gb 2h, 32Gb 3h, 64Gb 4h. Turn
off the Action Cam before inserting
or removing the card.
the button for about 2 seconds,
button for about 3 seconds,