To Connect Using Bluetooth - Kalorik HUVI Manual Del Usuario

There are 3 ways to connect HUVI to the app:
Bluetooth assisted (default, recommended): Uses the Bluetooth on
‒
your smart device to help connect to your WiFi.
EZ Mode: Uses your home WiFi network to communicate between
‒
your smart device and HUVI.
AP Mode: Uses HUVI's built in WiFi to communicate between your
‒
smart device and HUVI.
To connect using Bluetooth (default, recommended):
• Make sure the Bluetooth on your smart device is
switched on.
• Press and hold the HOME button on top of HUVI (Fig.
B) until the HOME button light turns light blue and
begins to flash while HUVI says "connecting to
network".
• In the app, press "Add Device" in the center of the
screen (Fig. C), then select the "Go to add" (Fig. D).
• Input your WiFi information, then select "Next" (Fig. E).
• Wait about 30 seconds while HUVI connects to the app (Fig. F).
• Once the connection is successful, select "Next" to complete.
• Your HUVI can now be controlled through the app.
Fig. C
www.KALORIK.com
Fig. D
13
Fig. E
HOME
BUTTON
Fig. B
Fig. F
211104