Accessories in a good condition guarantee improved suction and
1. Take the machine to the maintenance area.
2.
condition (see
"MACHINE SAFETY
3.
1.
condition (see
"MACHINE
SAFETY'").
2. To open the aspirator pull the lever (2) in the direction indicated by
(Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the
4.
1.
condition (see
"MACHINE
SAFETY").
2.
3.
4. Repeat the operations in reverse order to reassemble all the
parts.
1.
condition (see
"MACHINE
SAFETY").
2. To open the aspirator pull the lever (2) in the direction indicated
(Fig.12).
3. Using the handle (3) (Fig.13)
vacuum cleaner; (Tilting it as in (Fig.13)
1.
condition (see
"MACHINE
SAFETY").
2.
3.
4. Remove the damaged cable.
authorised collection centre.
•
Felt
•
Electric and electronic parts*
•
Plastic parts
•
Metallic parts
and electronic parts.
CLEANING ACCESSORIES
4.
5. Repeat the operations in reverse order to reassemble all the
").
INLET AIR FILTERS MAINTENANCE
5.
6. Repeat the operations in reverse order to reassemble all the
EXHAUST AIR FILTER MAINTENANCE
(Fig.20).
REPLACING THE FILTER – COLLECTION BAG
4.
5.
6. Close the suction device by pressing the closing lever (2) (Fig.15)
SUPPLY CABLE REPLACEMENT
5.
6.
(Fig. 16)
DISPOSAL
24
(Fig.3)
parts.
parts.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should
comply with current environmental protection regulations.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should
comply with current environmental protection regulations.
the collection drum and not to damage the cardboard support (6)
present in the bag (5) (Fig.14)..
on the collection barrel. Paying great attention to insert the
ATTENZIONE: Si consiglia di indossare sempre dei guanti
protettivi per evitare lesioni gravi alle mani.
(Fig. 16)