Brandt BCD510USB Manual De Instrucciones página 7

CASSETTE OPERATION
PLAYING A CASSETTE
1. Set the FUNCTION selector to the TAPE mode.
2. Press to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press to start playback.
5. To interrupt playback, press
6. Press or to fast wind or rewind the tape.
7. To stop the tape, press
The buttons are automatically released at the end of the tape except if PAUSE ( ) has been activated.
RECORDING
General information
Recording is permissible in so far as copyright or other rights of third parties are not infringed.
This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use
NORMAL type cassettes (IEC I) on which the tabs have not been broken.
The best recording level is set automatically. Altering the VOL and BASS controls will not affect the recording in
progress.
At the very beginning and end of the tape, no recording will take place during the 7 seconds, when the leader tape
passes the recorder heads.
To protect a tape from accidental erasure, have the tape in front of you and break out
the left tab. Recording on this side is no longer possible. To record over this side
again, cover the tabs with a piece of adhesive tape.
Recording from the radio
1. Tune in to the desired radio station (see 'LISTENING TO RADIO').
2. Press to open the cassette door.
3. Insert a suitable cassette into the cassette deck and close the cassette door.
4. Press to start recording.
5. To interrupt recording, press
6. To stop recording, press
AUX IN
To play music from personal player,
1. Set the FUNCTION selector to the
2. Connect your audio player to AUX IN jack with a cable (not included).
3. Set the audio player to play. The sound from the player will be heard through the speakers of this unit.
4. Turn the VOLUME control of this unit as desired.
. To resume playback, press
.
. To resume recording, press
.
AUX/USB/CD mode.
EN-6
again.
again.