Technoline WS 6812 Manual Del Usuario página 10

time signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it
fails again, it will start automatic reception at 1:00 again in the next day.
Manual reception: simply press and hold
manual reception. Press and hold
During RCC reception, all buttons do not function and it does not take temperature measurement.
The temperature reading will get stable and become more accurate after your weather station clock is
powered up for around 30 minutes.
To cancel DCF reception permanently
Press and hold / WAVE and
and the radio controlled function is permanently disabled.
To resume the radio controlled function, press and hold
seconds, your clock will give 1 short beep and will start DCF immediately.
TO SET TIME
1. Press and hold SET, 00 flash, press
2. Press SET again, hour digits flash. Press
or to accelerate setting at high speed.
3. Press SET again, the minute digits flash. Press
to accelerate setting at high speed.
4. Press SET again, display shows
from 5 to 60 minutes
5. Press SET to return to normal mode or it will return to normal mode in around 8 seconds if no
further press of any other buttons.
Your clock is in 24-hour display format.
TO SET ALARM (Default alarm setting is 6:00 AM)
Press and hold AL ON.OFF, the hour digits flash with "AL" icon appears. Press
1.
your desired alarm hours. Press and hold
2. Press AL ON.OFF again, the minute digits flash. Press
minutes. Press and hold
3. Press AL ON.OFF again or if no further press of any other buttons in around 8 seconds to exit
alarm setting mode.
TO TURN ON OR OFF YOUR ALARM
Single press AL ON.OFF to turn on or off the alarm. When the alarm function is turned on, the AL
icon appears on top of the time digits.
TO USE SNOOZE ALARM (Default snooze duration is 5 minutes)
When time reaches your set alarm time, your clock will sound to wake you up. The AL icon will flash.
Press once to stop the alarm temporarily, AL icon keeps flashing. The alarm will beep
again in 5 minutes or after your set snooze duration.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
To stop the daily alarm, press any button EXCEPT the
will stop and AL icon becomes static; alarm will beep again same time next day.
/ WAVE, your clock will give a short beep and start
/ WAVE to stop DCF reception.
at the same time for 2 seconds, your clock will give 1 short beep
/ to set the time zone : -01,00,01.
/
:05
and flash. Press
or
or to accelerate setting at high speed.
/ WAVE and
to set the current hour. Press and hold
/ to set minutes. Press and hold
/ button to set snooze duration
to accelerate setting at high speed.
/ to set your desired alarm
when alarm is beeping. The alarm
at the same time for 2
/ to set
or
GB 4